Autoglym Polar Blast

Size - 2.5l

Ensures Complete Coverage with a High Density Snow Foam Blanket

Polar Blast is a snow foam pre-wash that should be applied using a pressure washer. Covering the entire vehicle exterior with a magnificent blanket of foam ensures none of the surfaces are missed in the cleaning process. The foam clings to paintwork longer than regular shampoos to gently loosen and lift dirt. This reduces the risk of scratches and swirl marks that can be caused by a sponge or wash mitt when agitating heavy contamination on your paintwork. Its pH neutral formulation will not remove any existing layers of polish or wax.

How to use

1. Before you start check that your bodywork & wheels are cool to touch & out of direct sun light.
2. Polar Blast can be used at various dilutions depending on how much foam is desired. A good staring point is 100ml of Polar Blast to 500ml of water in your snow foam cannon bottle.
3. Spray Polar Blast on to the vehicles bodywork & wheels starting at the bottom.
4. Leave Polar Blast to dwell and loosen up the dirt for up to 10 mins but do not allow it to dry on.
5. Rinse thoroughly from the bottom up.

**This is not suitable for use on soft top convertibles**